SHEAR BOND STRENGTH OF ETCH AND RINSE ADHESIVES TO DENTIN: COMPARISON OF BOND STRENGTH AFTER ACID AND PAPACARIE PRE-TREATMENT

Authors

DOI:

https://doi.org/10.55519/JAMC-01-9292

Keywords:

Shear Bond strength, Tensile Strength, Acid Etching, Dentine conditioning, Adhesive

Abstract

Background: Papacarie pre-treatment of dentin surface has been reported to exhibit good bond strength values between dentin and composites. Its desirable properties like high pH, sites specify and anti-inflammatory response makes it a future material in place acid etching pre-treatment. Acid etching may cause sensitivity and collapse of dentinal matrix. Methods: This in-vitro study involved, 60 caries free extracted premolars, randomly divided into three groups. Control Group (Group A) No pre-treatment of dentin prior adhesive application. Experimental Group B acid etchant was applied before adhesive application. Experimental Group C Papacarie was used as a pre-treatment agent. All these specimens were tested for shear bond strength with the help of Universal Testing Machine. All the collected data was entered in SPSS version 20.0. ANOVA was used to determine the mean SBS (Shear Bond strength) values of control and experimental groups. Results The mean shear bond strength of material was 7.74±0.47 in group A, 17.80±1.43 in group B and 15.11±0.70 in group C. Group B showing better strength than other two groups. Conclusion: The study provides information about longevity of composite restorations and may help in extending the clinical usage of papacarie to avoid harmful effects of acid etching on dentin and pulpal tissue.

Author Biographies

Mehvish Sajjad, Avicenna Medical and Dental College Lahore

Senior Registrar Department of Dental Materials

Naveed Inayat, Islam Dental College Sialkot

Associate Professor; Department of Prosthodontics

Aneela Qaiser, Fatima memorial Hospital Dental College

Assistant Professor; Department of Dental Materials

Mehreen Wajahat, Avicenna Medical and Dental College Lahore

Assistant Professor; Department of Dental Materials

Mahwish Wahad Khan, Institute of Dentistry; CMH Lahore Medical College Lahore

FCPS Resident; Department of Prosthodontics

References

Nair M, Paul J, Kumar S, Chakravarthy Y, Krishna V, Shivaprasad. Comparative evaluation of the bonding efficacy of sixth and seventh generation bonding agents: An in vitro study. J Conserve Dent 2014;17(1):27-30.

Hoferichter C, Rüttermann S, Gerhardt-Szep S. Influence of three different dentin bonding agents on the adhesion of composite resin to dentine-An in vitro study. J Dent Probl Solut 2019;6(2):056-60.

Poggio C, Scribante A, Della Zoppa F, Colombo M, Beltrami R, Chiesa M. Shear bond strength of one step self-etch adhesives to enamel: effect of acid pretreatment. Dental Traumatology 2013;30(1):43-8.

Gateva N, Gusyiska A, Stanimirov P, Kabaktchieva R, Raichev I. Effect of etching time and acid concentration on micromorphological changes in dentin of both dentitions. J IMAB 2016;22(2):1099-1110.

Adhesive restorative materials: bonding of resin-based materials. In: McCabe JF, Walls AW, editors. Applied Dental Materials. 11 ed. Cambridge: Blackwell Publishing Ltd. 2011; p.230.

Carvalho RM, Manso AP, Geraldeli S, Tay FR, Pashley DH. Durability of bonds and clinical success of adhesive restorations. Dent Mater 2012;28(1):72-86.

Khattab NM, Omar OA. Papain-based gel for chemo-mechanical caries removal: Influence on Microleakage and Microshear bond strength of esthetic restorative materials. J Am Sci 2012;8(3):391-9.

Gianini RJ, do Amaral FL, Flório FM, Basting RT. Microtensile bond strength of etch and rinse and self etch adhesive systems to demineralized dentin after the use of a papain based chemomechanical method. Am J Dent 2010;23(1):23-8.

Jain K, Bardia A, Geetha S, Goel A. Papacarie: A chemomechanical caries removal agent. IJSS Case Rep Rev 2015;1(9):57-60.

Goomer P, Jain RL, Kaur H, Sood R. Comparison of the efficacy of chemomechanical caries removal with conventional methods- A clinical study. J Int Oral Health 2013;5(3):42-7.

Bussadori SK, Castro LC, Galvao AC. Papain Gel: A new chemo-mechanical caries removal agent. J Clin Paediatr Dent 2005;30(2):115-20.

Cecchin D, Farina AP, Brusco EH, Carlini-Júnior B. Effect of cariosolv and papacarie on the resin dentin bond strength in sound and caries affected primary molars. Braz J Oral Sci 2010;9(1):25-9.

Hamama HH, Yiu CKY, Burrow MF, King NM. Chemical morphological and microhardness changes of dentine after chemomechanical caries removal. Aust Dent J 2013;58(3):283-92.

Munir N, Inayat N, Qaisar A, Khan SA, Rana MH. Evaluation of integrity of Amalgam-composite interface with two resin based intermediate materials. J Bahria Univ Med Dent 2017;7(2):119-24.

El Mourad AM. Assessment of Bonding Effectiveness of Adhesive Materials to Tooth Structure using Bond Strength Test Methods: A Review of Literature. Open Dent J 2018;12:664-78.

Arora R, Goswami M, Chaudhary S, Chaitra TR, Kishor A, Rallan M. Comparative evaluation of effects of chemo-mechanical and conventional caries removal on dentinal morphology and its bonding characteristics-An SEM study. Eur Arch Paediatr Dent 2012;13:179-84.

Kotb RM, Elkateb MA, Ahmed AM, Kawana KY, El Meligy OA. Dentin Tapographic features following chemomechanical caries removal in primary teeth. J Peadiatr Dent 2016;40(6):472-9.

Pithon MM, Ferraz Cde S, de Oliveira Gdo C, Pereira TB, Oliveira DD, de Souza RA, et al. Effect of 10% papain gel on enamel deproteinization before bonding procedure. Angle Orthod 2012;82(3):541-5.

Davari A, Sadeghi M, Bakhshi H. Shear bond strength of an etch and rinse adhesive to Er : YAG Laser and for phosphoric Acid treated Dentin. J Dent Res Dent Clin Dent Prospects 2013;7(2):67-73.

Downloads

Published

2021-12-31

How to Cite

Sajjad, M., Munir, N., Inayat, N., Qaiser, A. ., Wajahat, M., & Wahad Khan, M. . (2021). SHEAR BOND STRENGTH OF ETCH AND RINSE ADHESIVES TO DENTIN: COMPARISON OF BOND STRENGTH AFTER ACID AND PAPACARIE PRE-TREATMENT. Journal of Ayub Medical College Abbottabad, 34(1), 45–48. https://doi.org/10.55519/JAMC-01-9292

Issue

Vol. 34 No. 1 (2022): JOURNAL OF AYUB MEDICAL COLLEGE ABBOTTABAD

Section

ORIGINAL ARTICLE

License

Journal of Ayub Medical College, Abbottabad is an OPEN ACCESS JOURNAL which means that all content is FREELY available without charge to all users whether registered with the journal or not. The work published by J Ayub Med Coll Abbottabad is licensed and distributed under the creative commons License  CC BY ND Attribution-NoDerivs. Material printed in this journal is OPEN to access, and are FREE for use in academic and research work with proper citation. J Ayub Med Coll Abbottabad accepts only original material for publication with the understanding that except for abstracts, no part of the data has been published or will be submitted for publication elsewhere before appearing in J Ayub Med Coll Abbottabad. The Editorial Board of J Ayub Med Coll Abbottabad makes every effort to ensure the accuracy and authenticity of material printed in J Ayub Med Coll Abbottabad. However, conclusions and statements expressed are views of the authors and do not reflect the opinion/policy of J Ayub Med Coll Abbottabad or the Editorial Board.

USERS are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles, or use them for any other lawful purpose, without asking prior permission from the publisher or the author. This is in accordance with the BOAI definition of open access.

AUTHORS retain the rights of free downloading/unlimited e-print of full text and sharing/disseminating the article without any restriction, by any means including twitter, scholarly collaboration networks such as ResearchGate, Academia.eu, and social media sites such as Twitter, LinkedIn, Google Scholar and any other professional or academic networking site.